Handpump

The Handpump is designed for use in areas where compressed air is not available and is capable of delivering pressures up 20MPa. An adjustable relief valve allows for the Handpump to be set to deliver the desired output pressure. The Handpump can be supplied with our without a pressure gauge fitted. The Handpump has a 1” BSP fitting for connection to a water delivery line and is supplied with a 4m hose and nozzle for connecting to Jackpots and Jackpacks.

Airpump

The NCM Airpump is designed to install mine support where compressed air is available. The Airpump is connected to a water supply hose and to a compressed air supply hose and an internal diaphragm is driven by the compressed air to intensify the water pressure on the downstream side of the pump to pressures of up to 18MPa, dependant on the supply pressure of the compressed air.
The Airpump is controlled by operating the trigger on the Safety Pistol connected to the delivery hose. By squeezing the trigger the pump is activated and the pressurised water is delivered to the nozzle. When the trigger is released the Airpump is shut off and the pressure to the nozzle is released.

The connectors for both the air and water delivery hoses are standard 1” BSPT Female fittings.

Service Documentation
Download
Hand Pump service manual

Risk Assessment Guidelines
Download Risk Assessment
Guidelines
for Airpump

High Pressure Airpump

The NCM High Pressure Airpump (HAP) is designed to install mine support where compressed air is available. The HAP pump is connected to a water supply hose and to a compressed air supply hose and an internal diaphragm is driven by the compressed air to intensify the water pressure on the downstream side of the pump to pressures of up to 30MPa (4350psi), dependant on the supply pressure of the compressed air.
The HAP is controlled by operating the trigger on the Safety Pistol connected to the delivery hose. By squeezing the trigger the pump is activated and the pressurised water is delivered to the nozzle. When the trigger is released the HAP is shut off and the pressure to the nozzle is released.
By using a Combinozzle, which automatically adjusts the delivery pressure, the HAP can be used to install Hydrabolts, X-Pandabolts and Jackpots.

The connectors for both the air and water delivery hoses are standard 1” BSPT Female fittings.

Service Documentation
Download
Hand Pump service manual

Risk Assessment Guidelines
Download Risk Assessment
Guidelines
for High Pressure Air Pump

Combi-Nozzle

The Combi-Nozzle is used when installing both Jackpots and Hydrabolts using the same high pressure pump. The nozzle automatically detects whether it is connected to a Jackpot or a Hydrabolt. If it is connected to a Jackpot then a port is opened to the 13 MPa PRV on the nozzle. When the pressure inside the Jackpot reaches 13 MPa then the PRV on the Combi-Nozzle relieves water until the trigger on the pistol is released. If the nozzle is connected to a Hydrabolt the 13 MPa PRV is shut off and when the Hydrabolt reaches 25 MPa then the 25 MPa PRV on the Safety Pistol relieves water until the trigger is released.

Risk Assessment Guidelines
Download Risk Assessment
Guidelines
for Combi-Nozzle

Hose Protector

The hose protector is designed to protect hoses where they enter the Airpump and High Pressure Airpump and thereby increases the life of hoses and improves productivity.

Safety Tips
Download safety tip:

4. Prevent
hose damage with the Jackpot Hose Protector

Other Accessories

Various other accessories are available such as pressure gauges for monitoring the delivery pressure of pumps as well as repair kits for the maintenance of the different pumps, safety pistols and different nozzles.

Pressure gauges for checking pump	Seal kits for pump repairs	Jackpack nozzle with integral PRV